Sensors and data collection are being used to improve efficiency throughout agriculture, including in cotton production. John Deere showcased its Precision Cotton Harvesting Technology at Agritechnica 2017 on its massive CP690 cotton harvester. The CP690 offers non-stop cotton harvesting technology, and now collects 27 data points for every module of cotton, including on-the-go moisture measurements…. Read More

Mechanically harvesting, drying and handling grain corn can compromise quality and take a bite out of a grower’s bottom line. Earlier this fall, OMAFRA crop systems and environment engineer James Dyck worked with Dietrich Farms of Lucan, Ontario to study mechanical breakage – the impact it has on dockage and what growers can do to… Read More

Mycotoxin and mould growth in dairy feed can lead to lower milk production, poor animal health and reduced profits. This impact on production is not a new discovery for dairy producers, but there certainly is a growing awareness of the problem, says North Carolina State University professor emeritus Dr. Lon Whitlow. “A large part of it… Read More

Is the corn going to make it? Will it mature before Ontario farmers are greeted by the first killing frost? Those were the two big questions that dominated conversations at Canada’s Outdoor Farm Show this week in Woodstock, Ontario. To get a good understanding of the challenges the provincial corn crop is facing, RealAgriculture sent… Read More

The canola pods are almost done filling, if not at full maturity, in many areas of the prairies, and harvest is beginning. We often think of scouting as something we have to do earlier in the season when there are still control options, but don’t always remember the importance of knowing what’s going on in… Read More

A late-maturing crop, difficult environmental conditions, significant insect pressure and potential for late-season leaf disease…although too early to tell – this growing list of factors could lead to another year of high vomitoxin levels in the Ontario corn crop. In this episode of RealAgriculture Corn School, OMAFRA plant pathologist Albert Tenuta takes a look at the… Read More

Uniform crop. Straight forward harvest. Chris Zemlak is planning to straight cut over half his canola acres this year. But if he had it his way, he would be straight cutting all of them. “There’s something fun about straight cutting canola with a 40-foot header, at 5 miles an hour and putting 40 to 50… Read More

As a farmer, you take care of our crops all year, pouring thousands of dollars into making sure the final product is up to the standards you expected. So why would you let all that time and money spent go down the drain when you lose a good portion of your crop to harvest loss?… Read More

Surging wheat markets mean there’s plenty of profit potential in high protein wheat, and Peter Johnson has some tips to help you cash in on those premiums. In this episode of RealAgriculture Wheat School, Johnson, our resident agronomist and shameless wheat promoter, shares protein management insights for growers in Western Canada and spring wheat growers… Read More

Take control back at harvest. Despite being new to straight cutting, Mark and Matt Ferguson have already seen a lot of progress. After trying the practice with a shatter-resistant variety on a small number of acres, they gained the confidence to expand to a larger number of acres. Find out how the Ferguson’s use straight… Read More

Five steps. Unlimited opportunities. Straight cutting has been a part of Kris and Bernie Klammer’s operation since the 80’s. And it’s clear why. After seeing success over several years, they decided to straight cut 100% of their acres in 2016 and plan to do the same in 2017. Hear their valuable advice on fertility, pre-harvest… Read More

Listen as canola growers and industry experts from across Western Canada discuss their straight cutting experiences and tips in this five-part podcast series presented by BASF. You won’t want to miss it. In episode 1 we’ll hear from Lee Erikson of Alberta. Since taking a stab at straight cutting almost 30 years ago, Lee was… Read More

Looking to get more road speed out of your tracked combine as you move from field to field? Camso believes it has the solution you’ve been looking for in its new Conversion Track System – CTS High Speed. The system was recently unveiled at the 2017 National Farm Machinery Show in Louisville, Kentucky. In this… Read More

 

Register for a RealAgriculture account to manage your Shortcut menu instead of the default.

Register